Differential Rebuild Kit Canam G1 G2 Rear DIFF Ring Pinon Bearing Seal READ 1447

Description

If your differential has been swapped there is a good chance this kit will not fit!
Please verify your differential uses this style of gears before ordering!
This will only work with 6 bolt style differentials!
Late G1 Early G2 Standard Rear Differential Rebuild Kit
There are a few options for rebuild kits, please measure your parts before ordering!!
OEM Rear Differential Gear set 10/36 Ring and Pinion gear set. The gears are straight cut as pictured.
Paired with high quality aftermarket bearings along with double lip axle seals.
This kit should be installed by an experienced technician. Ring gear shims are included as the gears will need to be set up in your cases, the pinion shims should remain unchanged
Note: the O rings are not included, this is a cost savings measure as they are generally reusable.
There are a few options for kits, please verify your differential uses this style of gears before ordering!
This will only fit six mounting hole differentials.
Open up the differential! Check for two bearings total (one on each side) on the ring gear. If you only have two proceed to the next measurement.
Measure your outer diameter of your axle seals! They should measure close to 1 3/4" (47mm)
To further verify fitment you can measure your pinion pilot shaft, this should be 9/16? (14mm)  The last pictures show this very clearly.
Please take the time to measure your parts before buying this will save time and restocking fees.
PLEASE VISIT OUR E-BAY STORE FOR MORE PARTS!!
We are regularly parting out many 06 to current outlanders and renegades.  We have over 5000 parts in stock, fully cleaned, refurbished and ready to ship.  We are constantly listing new blocks of available parts, so check in regularly.  We have over 25 years of experience working exclusively with BRP products and are very knowledgeable about correct parts applications.  We are the only store specializing in just can am parts, and you won't find a more experienced source for all of your used parts needs.  Please note that shipping quotes are for the lower 48 states only.  Costs for longer distances will be higher.  Call for an accurate shipping quote.
PLEASE NOTE!  All parts require proper mechanical skills to insure safe installation.  In some cases, special tools will be needed, and additional parts may also be required.  If you are unsure of proper parts applications, please ask us before you buy.  We will be glad to assist with your project within the boundaries of our knowledge.  If you are trying to retrofit parts, please do your homework before you buy.  There are several forums that provide a wealth of information on this subject.  ON MASS QUANTITY AUCTIONS THE PICTURE IS THE EXACT TYPE OF PART YOU WILL RECEIVE BUT NOT NECESSARILY THE EXACT ONE PICTURED.  ON MOST MASS QUANTITY AUCTIONS WE MAY HAVE AS MANY OF 50 EXAMPLES OF SOMETHING.  WE SEND THE BEST STUFF FIRST.  SOME PARTS WILL VARY IN HAVING DECALS OR NOT.  PLEASE ASK IF YOU DON'T UNDERSTAND.  THANKS!
A SINCERE THANKS FROM THE STAFF AT CAN AM PARTS GUY.